Design of Slotline Ring Resonator.pptVIP

Design of Slotline Ring Resonator 報告人：施冠州 日 期：2003/02/27 大綱 簡介 設計原理 設計步驟 結論 參考資料 簡介 Slotline configuration [4][7] FIELD DISTRIBUTION IN CROSS-SECTION VIEW [7] 設計原理 Circuit configuration of the slotline ring resonator with different coupling schemes[1,2,8] The frequencies of the slotline ring resonator are determined by The resonant frequency of a ring with a mean radius R can be calculated by 參數介紹(Harmonica) Harmonica w：Gap width Z0 ：Transmission line impedance F：Analysis frequency εr：Relative dielectric constant h：Substrate thickness λ0 ：free-space wavelength λg ：slot mode wavelength The equations for design are from [3]~[5] approximations for slot line [6] [7] 設計步驟 substrate – h (thickness) , εr (dielectric constant) film thickness resonant f (Hz) coupling methods (cpw,slot,microstrip……) Z0 (?) → w (line width) → εeff → R 範例 G-10 ： h =15 00μm , εr =4.6 film thickness = 100 μm resonant f = 2G Hz coupling methods → CPW Z0 = 50 ? → CPW： w=1500μm, g=410μm Z0 = 85 ? → slotline： G=530μm, εeff = 1.913279, R=17259μm . coupling gap=546μm The CPW-fed Slotline Ring Configuration 結論 The slot transmission line has a simple planar geometry that is compatible with microwave integrated circuit. Various coupling methods were devised for different applications. The slotline annular ring element with the advantages of good performance and ease of adding series and shunt components. Slotline types of annular ring elements have been developed as circuit components for the resonator, filter, latching phase shifters and hybrid coupler. 參考資料 [1] Chien-Hsun Ho; Lu Fan; Kai Chang,” Slotline annular ring elements and their applications to resonator, filter and coupler design”, Microwave Theory and Techniques, IEEE Transactions on , Volume: 41 Issue: 9 , Sep 1993 Page(s): 1648 –1650. [2] Navarro, J.A.; Lu Fan; Kai Chang,” The coplanar waveguide-fed electronically tunable slotline ring resonator”, Microwave Symposium Digest, 1992., IEEE MTT-S International , 1-5 Jun 1992 Page(