如何利用PS拼全图.doc

如何利用PS拼接全图 例如将以下三幅图拼成全图： 1.打开PS----文件---自动---photomerge，如图所示 2.点击浏览，找到自己所要导入图片的文件夹，按ctrl选择所要拼接的所有图片，点击确定。如图所示： 4.选择自己所需要的功能，点击确定。如图所示： 5.然后等待一会，形成如图所示： 6.进行修改及剪裁。①如果形成的图片歪曲，则按ctrl+T—移动图片。②如果背景图有其他颜色，则可以选择改掉，或者剪裁就可以了，如图所示 选择矩形图形工具，将周边背景涂改 选择剪裁工具，将完整的图片剪裁就可以了 7.修改或剪裁完，就点击工具栏上打钩图形工具就可以了。 8.最后如图所示,再最后点击储存为，自己命名文件名。点击保存即可。 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width 1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of th