《铁尾矿砂混凝土的泌水特性及对混凝土性能的影响毕业论文》.doc

《铁尾矿砂混凝土的泌水特性及对混凝土性能的影响毕业论文》.doc

  1. 1、本文档共37页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
河北理工大学 本科生毕业论文 题 目: 铁尾矿砂混凝土的泌水特性及对 混凝土性能的影响 英文题目: The Bleeding Behavior of Concretes Prepared with Ferrous Mill Tailings and Its Influence on Properties of Concretes 学 院: 材 料 学 院 专 业: 无机非金属材料工程 班 级: 06材3 姓 名: 田 素 芳 学 号: 200608010311 指导教师: 蔡 基 伟 2010年 6 月 10 日 摘要 尾矿是选矿厂选别矿石后产生的大量脉石废渣,通常以尾矿浆的形式排出。目前所有矿山对尾矿的主要处理方式是就近修建尾矿库,将其堆存起来。这样不仅占用大量土地,而且有很大的安全隐患。人们对天然砂石的过度开采,严重破坏了自然环境,并且还影响到了建筑业的可持续发展。为解决铁尾矿的堆存和天然砂的短缺这一对矛盾,同时为了解决铁尾矿砂本身保水性差,泌水量大的问题,本研究利用铁尾矿砂和铁尾矿粉为基本原材料,通过不同的矿物掺合料、减水剂、铁尾矿粉的掺入,配置出早快型、早慢型、晚快型、晚慢型四种泌水类型混凝土,通过测定不同类型混凝土抗压强度和孔结构特征,分析了对强度造成不同影响的具体原因。试验结果表明,早快型泌水混凝土虽然泌水量大,孔隙率大,但由于塑性收缩,有害孔少,而且实际水灰比低,所以强度依然很高;早慢型泌水混凝土有害孔和多害孔比例高,强度低;晚快型由于加入铁尾矿粉作为微细集料填充,强度也很高,但因为表面开放型气孔多,可能抗渗性不好;晚慢型泌水泌水量少,气孔率低,有害孔少,强度最高,其他性能也最优良,是最佳混凝土泌水类型。 关键词:铁尾矿砂,铁尾矿粉,泌水,混凝土,强度 Abstract The ferrous mill tailings is plant of gangue slag pulp chosen ore-dressing, which is often proposed in the form of the tail. Currently, the main method dealing with the ferrous mill tailings is to construct tailing dams for storage. This will not only take up much of the land, but also have a lot of security risks. At the same time, as the increases of consumption of the concrete materials used in construction, more and more natural aggregates are needed. The excessive exploitation of natural sand, not only seriously damages the natural environment, but also affects the sustainable development of the construction industry. In order to solve the contradiction of the storage of the ferrous mill tailings ore and the shortage of natural sand, also, in order to solve the problem that the adhesiveness of the ferrous mill tailings ore sand is relatively poor and the bleeding ratio is high, this paper takes the ferrous mill tailings ore in Qianan, Tangshan as Manufactured Fine Aggregate (MFA) and micro fines (powdery the ferrous mill tailings ore). Through adding 15% of FA and GBRS, different

文档评论(0)

goujia + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档