How to send a unicast packet.pptVIP

How to send a unicast packet? Procedure Roughly takes the following path (when no errors or congestion): recv() - send() - sendDATA() and sendRTS() - start defer timer - deferHandler() - check_pktRTS() - transmit() - recv() - receive timer started - recv_timer() - recvCTS() - tx_resume() - start defer timer - rx_resume() - deferHandler() - check_pktTx() - transmit() - recv() - receive timer started - recv_timer() - recvACK() - tx_resume() - callback_ - rx_resume() - done! recv ( ) void Mac802_11::recv(Packet *p, Handler *h) { struct hdr_cmn *hdr = HDR_CMN(p); assert(initialized()); if( hdr-direction() == hdr_cmn::DOWN ) { send(p, h); return; } if(tx_active_ hdr-error() == 0) { hdr-error() = 1; } if(rx_state_ == MAC_IDLE) { setRxState(MAC_RECV); pktRx_ = p; mhRecv_.start(txtime(p)); } else { ……………………………………………………………………………………… } } send( ) sendDATA( ) Mac802_11::sendDATA(Packet *p) { hdr_cmn* ch = HDR_CMN(p); struct hdr_mac802_11* dh = HDR_MAC802_11(p); assert(pktTx_ == 0); ch-size() += phymib_.getHdrLen11(); dh-dh_fc.fc_protocol_version = MAC_ProtocolVersion; dh-dh_fc.fc_type = MAC_Type_Data; dh-dh_fc.fc_subtype = MAC_Subtype_Data; dh-dh_fc.fc_to_ds = 0; dh-dh_fc.fc_from_ds = 0; dh-dh_fc.fc_more_frag = 0; dh-dh_fc.fc_retry = 0; dh-dh_fc.fc_pwr_mgt = 0; dh-dh_fc.fc_more_data = 0; dh-dh_fc.fc_wep = 0; dh-dh_fc.fc_order = 0; /* store data tx time */ ch-txtime() = txtime(ch-size(), dataRate_); if((u_int32_t)ETHER_ADDR(dh-dh_ra) != MAC_BROADCAST) { /* store data tx time for unicast packets */ ch-txtime() = txtime(ch-size(), dataRate_); dh-dh_duration = usec(txtime(phymib_.getACKlen(), basicRate_) + phymib_.getSIFS()); } else { /* store data tx time for broadcast packets (see 9.6) */ ch-txtime() = txtime(ch-size(), basicRate_ ); dh-dh_duration = 0; } pktTx_ = p; } sendRTS( ) void Mac802_11::sendRTS(int dst) { Packet *p = Pack