section10605-wiremeshpartitions-chrysler.docVIP

SECTION 10605 - WIRE MESH PARTITIONS GENERAL SUMMARY This Section includes heavy-duty, interior partitions fabricated from wire mesh: DEFINITIONS Terms below shall be as defined in ASTM?E?2016: Lock Crimp: Deep crimps at points of intersection that lock wires securely in place. PERFORMANCE REQUIREMENTS Structural Performance: Provide additional or supplemental supports for wire mesh partitions to secure and stabilize partitions within truss spaces. SUBMITTALS Product Data: Include construction details, material descriptions, dimensions of individual components and profiles, and finishes for wire mesh items. Shop Drawings: Include plans, elevations, sections, details, and attachments to other work. Samples for Initial Selection: For units with factory-applied color finishes. Maintenance Data: For wire mesh partition door hardware to include in maintenance manuals. QUALITY ASSURANCE Installer Qualifications: An employer of workers trained and approved by manufacturer. Installers responsibilities include fabricating and installing wire mesh items and providing professional engineering services needed to assume engineering responsibility. Source Limitations: Obtain wire mesh items through one source from a single manufacturer. Welding: Qualify procedures and personnel according to the following: AWS?D1.1, Structural Welding Code--Steel. AWS?D1.3, Structural Welding Code--Sheet Steel. Preinstallation Conference: Conduct conference at Project. DELIVERY, STORAGE, AND HANDLING Deliver wire mesh items palleted or crated to provide protection during transit and Project-site storage. Do not use nonvented plastic. Inventory wire mesh partition door hardware on receipt and provide secure lockup for wire mesh partition door hardware delivered to Project site. Tag each item or package separately with identification and include basic installation instructions with each item or package. Deliver keys to Owner as directed by the Construction Manager PROJECT CONDITIONS Fi