1- automotive research and development, automotive service（1 -汽车研发、汽车服务）（230页）.docVIP

AUTOMOTIVE INDUSTRY STANDARD Information on Technical Specifications to be submitted by the Vehicle Manufacturer (Revision 5) PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B. NO. 832, PUNE 411 004 ON BEHALF OF AUTOMOTIVE INDUSTRY STANDARDS COMMITTEE UNDER CENTRAL MOTOR VEHICLE RULES – TECHNICAL STANDING COMMITTEE SET-UP BY MINISTRY OF ROAD TRANSPORT and HIGHWAYS (DEPARTMENT OF ROAD TRANSPORT and HIGHWAYS) GOVERNMENT OF INDIA June 2014 Status chart of the Standard to be used by the purchaser for updating the record Sr. No. Corrigenda. Amendment Revision Date Remark Misc. General remarks:  Information on Technical Specifications to be submitted by the Vehicle Manufacturer INTRODUCTION: This document consolidates the information to be provided by the motor vehicle manufacturer, construction equipment vehicle manufacturer and agricultural tractor manufacturer while applying for a certificate of Compliance to CMVR. Subsequent to the decisions of the CMVR – Technical Standing Committee, this standard was revised to take care of the new regulations and requirements in CMVR and to simplify the existing procedure. The panel constituting the testing agencies and the manufacturers discussed and decided upon the technical details that are required to be provided by the vehicle manufacturers at the time of applying for the type approval. The AIS-007 (Revision 5) documents were finalized in the month of March 2014, taking into consideration the new standards that were decided to be implemented under CMVR, by Automotive Industry Standards Committee and CMVR-Technical Standing Committee. The revision of 2, 3 and 4 wheeler automotive vehicle specifications have been carried out considering the introduction of the following new standards which are under the process of getting notified under CMVR, namely, AIS-004(Part 3) – EMC AIS-091 – M