answerthefollowingquestions（answerthefollowingquestions）（6页）.docVIP

Measuring Instruments Chapter 1 : Analog Meter Movements Answer the following questions :- Show True or False :- 1- The effective error Em is related to the measured current Im and the calibration error as Em % = ( CE / Im ) x 100 % . 2- The taut-band movement more sensitive than the Darsonval meter movement. 3- The 100 % accuracy means that the measured value is exactly equal to the true value . 4- When the Rm of the meter is relatively high this means that the accuracy is very high. 5- The Dynamometer has higher sensitivity than the Darsonval meter movement. 6- The internal resistance of the ideal meter movement is high. 7 – The loading effect for a measuring instrument may cause an error . 8 - The iron - vane movement primarily used for low frequencies AC measurements. 9 – The sensitivity of meter movement means the smallest possible change in current would produce a readable change in pointer deflection. Solve the following : 1 ) For the circuit in figure IFS = 500 μA and Rm = 400 Ω . determine the following : a ) The original current Io b ) The measured current Im c ) % of accuracy a d ) % of error e 2 ) The accuracy of a 0 to 100 μA meter movement is stated as 4 percent of the full scale value The amount of calibration error ( CE ) . The range ( R ) of current when the meter reads 60 μA . The percentage error ( Effective error Em % ) at the measured current. Questions : 1 ) a - Complete the main parts on the figure of the Darsonval meter movement . b ) From the above figure (Darsonval meter movement )complete the following : 1 ) The purpose of the horseshoe magnet is to .................................................................. .................................................................. ..........................................................................................