MULTIPASS LIQUID INTERNAL COATING SYSTEM - NACE 0191.pdfVIP

Recommended Practice For MULTIPASS LIQUID INTERNAL COATING Freecom, Inc. CeRam-Kote Coatings Modeled after NACE RP-0191: The Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories Section 1: General 1.1 This standard presents guidelines for the proper application of CeRam-Kote thin-film coatings to the internal surfaces of Oilfield Tubular Goods and accessories. 1.2 The function of the CeRam-Kote thin-film internal coating system is to provide a protective barrier between the metal surface and the environment. 1.3 CeRam-Kote extends the service life of the tubular goods and accessories by preventing or minimizing corrosive attack. Proper coating application prevents premature failure. 1.4 This standard addresses initial visual inspection of the tubular goods and accessories prior to coating, surface preparation, coating application, coating inspection, coupling/connection make-up, quality control, handling, storage, shipping, and marking or identification. Section 2: Definitions Applicator: An individual or company who performs the coating application. End-user (user): An individual or company, or its authorized representative(s), who will make use of the internally coated tubular goods and accessories. ICC material: Internally Ceramic Coated (ICC) tubular goods (tubing, casing, line pipe, drill pipe) and accessories (couplings, fittings, valves, mandrels, etc.) Oilfield Tubular Goods (OTG): Carbon steel pipe either tubing, casing, line pipe, or drill pipe. Manufacturer: Freecom, Inc., manufacturer of CeRam-Kote internal protective coatings. Ceramic coating: A polymeric film applied to the internal surfaces of OTG’s and accessories to form a protective barrier between the metal surface and the environment to minimize corrosion and abrasion attack, contamination, and/or deposit formation. Section 3: Preliminary Requirements 3.1 The applicator shall furnish all labor, c