基于有限元法的染污直流支柱复合绝缘子伞裙参数优化.pdfVIP

第 33 卷 第 22 期 中 国 电 机 工 程 学 报 Vol.33 No.22 Aug.5, 2013 2013 年 8 月 5 日 Proceedings of the CSEE ©2013 Chin.Soc.for Elec.Eng. 183 文章编号：0258-8013 (2013) 22-0183-08 中图分类号：TM 216 文献标志码：A 学科分类号：470⋅40 基于有限元法的染污直流支柱 复合绝缘子伞裙参数优化 郝艳捧 1，熊国锟 1，刘芹 2，薛艺为 1 浧，李立 1 (1．华南理工大学电力学院，广东省 广州市 510640； 2．南方电网科学研究院有限责任公司，广东省 广州市 510080) Optimization of Shed Parameters of Polluted DC Post Composite Insulators Based on Finite Element Method HAO Yanpeng1, XIONG Guokun1, LIU Qin2, XUE Yiwei1, LI Licheng1 (1.School of Electric Power, South China University of Technology, Guangzhou 510640, Guangdong Province, China; 2. Southern Power Grid Electric Power Research Institute of China Co.,Ltd., Guangzhou 510080, Guangdong Province, China) ABSTRACT: The pollution flashover problem of DC post insulators is much more serious than that of AC post insulators. Sheds optimization can ameliorate the pollution flashover characteristic of DC post insulators. Based on the sheds optimization result of artificial pollution tests, this paper established polluted post insulators by finite element method and studied the electric field distribution along polluted insulators influenced by spacing between large sheds, overhang of the large shed and difference between overhangs of the large shed and small shed. The creepage distance and electric field were put forwards as the criterion to optimize the parameters of sheds. The results show that, as the spacing between large sheds increases, the average electric field of post insulators decreases gradually; as the overhang of the large shed increases, the average electric field of post insulators increase by degrees; as the difference between overhangs of the large shed and small shed increases, the creepage coefficient decreases monotonously, and the average electric field of post insulators is reduced and oscillated. Finally, advice parameters for follow-up researches on shed profile optimization of DC post ins