Determination of the normal retina tomograph optic disc parameters in adults Zhuang.docVIP

 PAGE \* MERGEFORMAT 11 Determination of the normal retina tomograph optic disc parameters in adults Zhuang [Abstract] Objective: To understand the Zhuang optic disc parameters of normal healthy people and the establishment of the Zhuang database. Methods: 3 on behalf of the County of living widely Xilong Lin Zhuang unrelated normal adults 120 cases. Using Heidelberg retina tomography (Heidelberg retina tomograph , HRT ) were detected in different age groups the overall parameters of the optic nerve head topographic maps. Results: The normal optic disc Zhuang: DA was 2.26 +-0.47mm2, CA was 0.51 +-0.35mm2, RA was 1.75 +-0.34mm2, C / DAR was 0.21 + -0.12, R / DAR was 0.80 + -0.12, CV is 0.12mm3, RV was 0.53 +-0.14mm3, MCD was 0.21 +-0.10mm, MxCD as 0.60 +-0.22mm, HVC 0.45 +-0.10mm, CSM was 0.20 +-0.07mm, mRNFLT as 0.30 +-0.07mm, RNFLA as 1.57 +-0.43mm2. each quadrant mRNFLT, RNFLA negatively correlated with age. sexes and other eye was no statistical difference between significance. Zhuang C / DAR ratio difference between eyes of 0.00 to 0.16 range. Conclusion: HRT II quantitative detection of optic disc parameters of normal Zhuang, age has some influence on the optic disc parameters. [Keywords:] Zhuang, optic disc, retinal tomography Abstract ?r AIM: To study the optic nerve head parameters and topograph features of normal subjects in Zhuang nationality in Guangxi for establishing database.METHODS: One hundred and twenty blood unrelated nomoral volunteers living in Longlin county of Guangxi were involved in the study.Heidelberg retina tomograph (HRT ) was used to obtain the optic nerve head parameters. RESULTS: The parameters included optic disc area 2.26 +-0.47mm2, cup area 0.51 +-0.35mm2, CUP / disk area ratio 0.21 + -0.12, rim / disk area ratio 0.80 + -0.12, cup volume 0.12mm3, rim area 1.75 +-0.34mm2, rim volume 0.53 +-0.14mm3, height variation contour 0.45 +-0.10mm, cup shape measure 0.20 +-0.07mm, mean cup depth 0.21 +-0.10mm, maximum cup dept