红外热像技术在混凝土结构无损检测中的应用.pdfVIP

第六届全国土木工程研究生学术论坛 清华大学 2008 红外热像技术在混凝土结构无损检测中的应用 刘守亮 （西安建筑科技大学土木工程学院，西安 710055） 摘 要： 建筑工程质量直接关系到人民群众的切身利益。如何对建筑工程进行监督检验成为工程质量监督部门 的一大难题。目前红外检测技术在对建筑结构工程中的应用还不广泛，故红外成像技术在建筑工程中用来无损探 测，分析和掌握结构内部状态便成了一项新技术。用红外热像仪对混凝土结构进行观测，利用红外图像的异常点 来检测其内部及表面缺陷，并及时采取措施检修，防止事故发生，是目前在预知检修领域中普遍推广的一种很好 的手段。本文将结合美国FLIRThermaCAM E300 红外热像仪在岭澳核电站安全壳老化检测研究中应用的实例，浅 谈一下红外热成像技术在建筑工程检测领域中的应用体会。 关键词： 红外线成像；无损检测；缺陷 Infrared imaging technology in the concrete structure of NDT LIU Shou-liang (Xi’ an University of Architecture Technology , Xi’ an710055 , China) Abstract: Architectural engineering quality is directly relative to peoples vital interest. How to carry out the construction engineering quality supervision becomes a big difficult problem for inspection and supervision departments. So far, infrared detection technology is still not widespread in structural construction, so the infrared imaging technology to analyse and master the internal state of structure has become a new technology in the construction of non-destructive detection. Structural internal and surface defects could be detected by using infrared images abnormal points in infrared detection of the concrete structure, thus, we may take measures to repair structures and prevent incidents. Infrared imaging nondestructive technology is a widespread good method in the anticipated overhaul area now. This article is basis of the United States FLIRThermaCAM E300 infrared imaging system and the example of Lingao nuclear power station safety shell degradation detection, and introduces the application experience of infrared thermal imaging technology in structural construction dectection. Key words: infrared thermal imaging ；nondestructive testing ；defects 1 引言