Numerical simulation of in vivo intraosseous torsional failure of a hollow-screw oral implant 英文参考文献.docVIP

Head Face Medicine BioMedCentral Research Open Access Numerical simulation of in vivo intraosseous torsional failure of a hollow-screw oral implant Murat Cehreli*1, Murat Akkocaoglu2 and Kivanc Akca3 Address: 1Associate Professor of Prosthodontics, CosmORAL Oral and Dental Health Polyclinics, Cinnah 7/5 Kavakl?dere, Ankara, Turkey, 2Associate Professor, Department of Oral Surgery, Faculty of Dentistry, Hacettepe University, 06100 Sihhiye, Ankara, Turkey and 3Associate Professor, Department of Prosthodontics, Faculty of Dentistry, Hacettepe University, 06100 S?hhiye, Ankara, Turkey Email: Murat Cehreli* - mccehreli@; Murat Akkocaoglu - makkocao@.tr; Kivanc Akca - akcak@.tr * Corresponding author Published: 04 November 2006 Received: 15 May 2006 Accepted: 04 November 2006 Head Face Medicine 2006, 2:36 doi:10.1186/1746-160X-2-36 This article is available from: /content/2/1/36 ? 2006 Cehreli et al; licensee BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Abstract Background: Owing to the complexity and magnitude of functional forces transferred to the bone-implant interface, the mechanical strength of the interface is of great importance. The purpose of this study was to determine the intraosseous torsional shear strength of an osseointegrated oral implant using 3-D finite element (FE) stress analysis implemented by in vivo failure torque data of an implant. Methods: A ? 3.5 mm × 12 mm ITI? hollow screw dental implant in a patient was subjected to torque failure test using a custom-made strain-gauged manual torque wrench connected to a data acquisition system. The 3-D FE model of the implant and peri-implant circumstances was constructed. The in vivo strain data was c