气动技巧在扁平保送带纠偏装配中的应用(国外英文资料).docVIP

气动技术在扁平输送带纠偏装置中的应用(国外英文资料) Chen jinbing, Lin jia yue, zhao. Better your new automatic control department of the university of Beijing institute of technology, Beijing 18 to advantage the introduction with the widely application of the automation technology, material transfer can more quickly more accurate location is more efficient. The flat conveyor belt belt is traditional and effective. Continuous movement of unprovoked, transmission type, conveyor belt is carrying goods of artifacts, and pass drawing artifacts, rely on the friction between belt and roller drive smoothly, it almost can be used for conveying of various kinds of materials. A song that is sent in the flat belt will be asked for a technical question about the dipany. There are various kinds of dynamic deviation of the solution. It is difficult to guarantee that the correct deviation is used in the mode of rectifying, which affects the response of the flat belt to the transmission of high speed precision. The dynamic correction has a high reliability and high reliability, and now it has been developed rapidly. The actuator can have the electromagnetic mode hydraulic mode and pneumatic mode. The rapid development of the pneumatic technology of the factory. The pneumatic system has several cost and low cost structure and simple control, so it is widely used. This paper introduces the method of rectifying by pneumatic drive. The flat belt conveyor is small, the conveyor belt around the driver roller and the compact roller. And you need to choose to roll the ball. The mountain motor drives the rolling stock, which drives the conveyor belt, the usual fault of the belt conveyor. Cause many of the conveyor belt running deviation, conveyor belt of the system and the connection + 1 that is made with conveyer belt edge after the center line of + roller surface with material hall, or conveyor belt inside with foreign body, irregular changes have taken place in the actual diameter of roller. Partial rollers are