多芯铋系超导材料轧制过程中的变形分布研究.pdfVIP

Vo l. 15 No.2 第 15 卷第2 期 费性 J民税等报 2008 年4 月 JOURNAL OF PLASTICITY ENGINEERING Apr. 2008 多芯铅系超导材料轧制过程中的变形分布研究骨 曾攀霄丽萍方刚 (清华大学机械工程系，先进成形制造教育部重点实检室，北京 100084) 张晓峰蔡芳 摘 要:鹦性变形是锵系超导带材加工的必要手段，多芯相导体在成形划程中的变形分布对成形质最具有重要影 响。文章对多芯甜导带材在轧制过程中不向加工道~变形横截闹的形貌进行处理，输出了超导带材多芯的变形形 视及其变化规律，涉及各超导芯在轧制过程中的轧制方向和横向的应变分布;并结合塑性加工的变形理论对分布 规律进行分析。取得的研究结果可以为开展锚系商跑跑导带材的数值模拟提供实验基础，并为改进相导带材生产 工艺、提高带材性能提供重要参考。 关键词:锵系超导;轧制;变形分布 中圈分类号: TG306 文献栋识码:A 文章编号: 1007-2012 (2008) 02-0001-05 Deformation distribution of multi嗣fiI ament superconducting tape during rolling process ZENG Pan LEI L卜ping FANG Gang ZHANG Xiao-feng CAI Fang (Department of Mechanical Engineering , Key Laboratory for Advanced Materials Processing Technology , Tsinghua University , Beiji昭 100084 China) Abstract: Fonning is an irreplaceable processωfabricate the 政汇α) superconducting tape. The defonnation distribution of multHilament superconducti咱 tape will strongly affect its quality. Thís paper addresses the defonnation configuratíons of the tapes of typical processing pass巳s by analysis of defonnation morphogenesis of tapes. The defonnation distrihution of the superω conducting filament at different position is presented with sαne contours , and the infonnation involves the strains in rolling direc唰 tion (RÐ) and transverse direction (TD). The classical plastic theory is cited to explain the defonnatíon dístribution. The re- 悦arch results can provide an important base or reference ωunderstand the defonnation distribution of multi-filament supercon- ducting tape during rolling proces