挤出机选择参考(国外英文资料).docVIP

挤出机选择参考(国外英文资料) Selection of extruder: First, according to the specifications of molded products to choose: Product specifications are different, the amount of material is not the same, you can refer to the screw diameter and product specifications and sizes, first select the diameter of the screw, and then by the screw diameter to further select the specifications of extruder models. Two, the selection of raw materials used in extrusion products: PVC extrusion molding equipment Single screw extruder 20 years ago, PVC extrusion molding with tapered single screw extruder, because PVC is a heat sensitive plastic extruder, the screw speed is not too high, to put the PVC powder (tablets) granulation, and then put into production, and later with the PVC powder extruder, without granulation that can be directly put the powder into the extruded product production machine can be well mixed. Note: for soft PVC products that need to be added plasticizers in PVC materials, they must be granulated before extrusion and then extruded. Conical twin screw extruder This kind of extruder for extrusion of proper price, not PVC powder caused by friction heat is too high, to avoid the decomposition of raw materials, extrusion stability, high yield of finished products and the performance is also guaranteed, currently with PVC mixed powder production of rigid PVC products, first consider the use of the extruder. Parallel twin screw extruder The extruder can directly PVC powder by direct extrusion pipe, special-shaped material, also suitable for HDPE extrusion pipe production than the above two kinds of extrusion machine is high, but because the price is too high and the maintenance is complicated, the application is less. 2 other plastic extrusion equipment For PE, PP, PS extrusion molding, PC, ABS plastic, the selection of a single screw extruder, which is mainly the extruder is cheap, operation and maintenance more convenient, and now has a single screw extruder, the ratio of length t