水泥窑余热发电辅助MEA碳捕集系统研究.pdfVIP

ABSTRACT The excessive emission of greenhouse gas leads to global warming, carbon capture and storage (CCS) and improving energy utilization efficiency are two of the most significant technologies to mitigate climate change. As the second carbon emission resource next to power plant, cement plant produces 932 megaton carbon dioxide per year. Large amount of waste heat fail to be fully used during cement production process which leads to low energy efficiency in cement industry. The only solution to carbon reduction in cement industry is to combine CCS and efficient waste heat utilization technology. This paper proposes a novel carbon capture system using MEA combined with waste heat recovery for power generation in cement plant. On the basis of energy cascade utilization principle, low pressure steam of dual-pressure waste heat generating system can be used to meet the heat requirement of re-boiler in MEA carbon capture system. The system can achieve both power generation and carbon capture in cement industry. Aspen Plus software is employed for simulation of MEA carbon capture system, simulation results of re-boiler duty, as well as parametric influence of flue gas load and pressure in Stripper can be obtained. Visual Basic is used for model development of dual-pressure waste heat generating system, parametric study has been conducted targeting on performance of power generation and heat supply to re-boiler. Based on above calculation results, technical analysis and economic evaluation has been done for carbon capture system using MEA combined with waste heat recovery for power generation in cement plant. In technical analysis, this paper develop ps parametric design for systems with different carbon capture rate, variation of carbon capture rate and generating capaci