湿热环境对胶接接头冲击性能的影响.pdfVIP

Abstract In this thesis, The Charpy style steel/adhesive bonded joints and single-lap joints have been investigated by experiments in order to improve the operational reliability and impact toughness of adhesive bonded joints. Based on the investigation that effect of shock time on the thermal stress in the single lap joint, the effects of the hydrothermal environments on the impact toughness of Charpy style adhesive bonded joints and single-lap joints were studied. The Failure mechanism of materials under the hydrothermal condition was analyzed by FTIR and SEM. The main research results are as follows: 1) The effects of the hydrothermal condition on the impact toughness of adhesive bonded joints were studied and it was found that there is a relationship to the moisture absorption of the adhesive layer with the immersed time. The impact toughness of the specimen decreased as the soak time increased. 2) The characteristic of the medium was one of the important factors that had an effect on the impact toughness of adhesive bonded joints. The various corrosive medium to the specimen was ranked based on the impact toughness decrease with different degree as follow as: H O NaCl NaOH. 2 3) The environment temperature also had a crucial role in influencing the impact toughness of adhesive bonded joints. The impact toughness of the specimen in neutral medium decreased as the media temperature increased. However, the results obtained from the experiments show that the impact toughness of the specimen in alkali medium increased fist and then decreased with the longer time and the higher temperature. 4) The results of FTIR spectra analysis and SEM observation of the adhesive bonded joints indicated that the physical change