对讲机说明书（国外英文资料）.doc

对讲机说明书（国外英文资料） KENWOOD TK - 378/278 Chinese manual 378/278 10:43 KENWOOD TK378 interphone is a kind of high cost performance model, in which introduces the programming method and maintenance of the basic adjustment, in order to reference for maintenance personnel. Programming method 1. At the same time hold down the LAMP (light side key) and DIAL two keys, connected to the power supply, LCD shows the SEL after two seconds, which entered the distributor model. In this display, press the TA button to enter the channel frequency programming state, displaying the channel number. 3. Choose a knob to choose good channel with channel number (a total of 32 channel), press key (PTT) call, coupled with the keyboard to enter the channel number of each function setting. Set of functions for the channel number in turn, receive frequency, receiving CTCSS frequency, transmitting frequency, launch CTCSS frequency, DTMF signaling, ANI function, Can be scanned, lock busy channel, clock beat frequency deviation, launch power, from station number (DTMF) etc. After all the channel functions and parameters are set, the LCD screen displays END and closes. Note: in setting the frequency, Switch the step value with the SCN key (6.25 kHz / 5kHz); Hold down the LAMP key and rotate the channel select button to change the value of the step in 1MHz. Adjust the adjustment of the machine Hold the LAMP and TA keys at the same time, open the power supply, after two seconds to enter test mode, press 1 under the TA, rotating channel select button to choose a good frequency again, again according to the LAMP and L0 keys at the same time, Show the tUnE character and enter the adjustment mode. Adjust high emission power values and low emission power values The power meter is connected to the communication machine, choose good frequency, make communication machine in the show most cerebral sci-film state, hold PTT button, automatically with high power emission, at this time, LCD displays H -, eyeing power