模拟题1（国外英文资料）.doc

模拟题1（国外英文资料） The reliability of power supply is usually assessed using (A). The reliability rate of the electricity supply in the year of the year In order to analyze the load rate, it is commonly used (daily load ratio). The high-pressure distribution network is the distribution network of voltage (C) and above. A. A A transformer (C) short circuit, when a winding is applied to the current to reach the rating, the power absorbed by the transformer is called a short circuit loss. A. one winding b. high voltage c. secondary winding The lowest voltage level of a line terminal in our countrys power system is (B). A.0.38 kV In the case of the internal loss of the transformer, the ratio of the second electric current to the transformer is inversely proportional to that of D. A. i. the instantaneous value of the electric potential B. one, second side induction voltage maximum The instant value of the second side voltage The number of turns per second winding The voltage of transformer is divided into (C). There are excitation pressure and load pressure No excitation pressure and no load pressure No excitation pressure and load pressure If the internal loss of the transformer is ignored, the output power of the secondary winding of the transformer is equal to one winding (A). A. input power b. loss power c. reactive power Current transformer is divided into measurement and current transformer and (C). A. Charging current transformer Electrical current transformer is used for insulation C. protect the current transformer The capacity of the rated capacity (B) winding of the double winding transformer. A. greater than B The winding of the transformer is (A) between the iron core. A. insulation b. conductive c. electrical connection 11, tens of thousands of volts, or hundreds of thousands of volts high-voltage electricity to (C), must go through different step-down transformer will be decreased to different levels of voltage, high voltage to meet the needs of all kinds of loa