造船过程—罗承(修改稿).ppt

The Shipbuilding Process 造船过程 13414 演讲 厚军杰 文字 罗承 (修改) 图片 詹超 制作 胡峰 Contents Drawing Office produce the working drawing provide information enable steelwork outfitting and machinery items to be ordered and delivered Plan Approval receive classification society approval the shipowners approval Plan Issue Steel Ordering begin at the earlist apportunity a key function in the prouduction process the monitoring and control of stock Loft Work places:a mould loft drawn to full size or some smaller more convenient scale work method:computer ,wooden templates,mock-ups Numerical Control A machine is operated and controlled by the insertion of numerical data. Materials Handling appropriate location of work stations or aceas reduce the number of items handled require greater care and more sophisticated equipment Materisls Preparation surface shot blasting derusting coated with alayer of protection primer straightened by rolling to remove any curvature Shot-blasted and Priming Straightening using a plate rolls machine the upper and lowerrollers soaced at its thickness Cuttung and Shaping form the subassemblies,assemblies and units Fabrication and Welding of Hull division of sections fabrication and welding of parts fabrication and welding of blocks and sections. Tightness Test Objective ：check the leakage of welding seams. Ship Launching gravity launching floating launching traction launching Thank you ! Drawing Office Plan Approval Plan Issue Steel Orderinng Loft Work Numerical Control Materials Handling Materials Preparation Shot-blasted and Priming Straightening Cutting and Shaping Fabrication and Welding of Hull Tightness Test Ship Launching receive copies of plans the owners owners reperesentative classification society water-wash heat-dry the plates before descaling shot-blasted both sides clean and recycle shot covered with a coat of priming paint