均匀化退火对70506009复层板坯组织、成分和力学性能的影响.pdfVIP

Trans. Nonferrous Met. Soc. China 26(2016) 2532−2541 Effect of homogenization annealing on microstructure, composition and mechanical properties of 7050/6009 bimetal slab 1 1 1 2 1 Guang-yuan YAN , Feng MAO , Fei CHEN , Zhi-qiang CAO , Tong-min WANG 1. Key Laboratory of Materials Modification by Laser, Ion, and Electron Beams, Ministry of Education, School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China; 2. Laboratory of Special Processing of Raw Materials, Dalian University of Technology, Dalian 116024, China Received 9 October 2015; accepted 13 June 2016 Abstract: Homogenization annealing of the 7050/6009 bimetal slab prepared by direct-chill casting was investigated and its effects on microstructural evolution, composition distribution and mechanical properties in the interfacial region of the bimetal were studied. The results show that the optimized homogenization annealing process was 460 °C for 24 h. After homogenization annealing, the Zn-rich phases and Al (FeMn) Si phases were precipitated at the interface of the bimetal. The diffusion layer thickness of 15 3 2 homogenized bimetal increased by 30 µm from 440 to 480 °C for 24 h, while it increased by 280 µm from 12 to 36 h at 460 °C. The Vickers hardnesses at 6009 alloy side and interface of the bimetal decreased after homogenized annealing and grain coarsening was considered as the dominating softening mechanism. The hardness variation at 7050 alloy side was complicated due to the combined action of solution strengthening, dispersion strengthening and dissolution of reinforced phases. Key words: bimetal sl