反复熔铸对非贵金属烤瓷合金铸流率的影响论文.docVIP

　　反复熔铸对非贵金属烤瓷合金铸流率的影响论文 赵伟, 程辉, 郑志强, 郭永锦, 李秀容 【关键词】 非贵金属烤瓷合金; 反复熔铸; 铸流率 ABSTRACT: Objective Department of Prosthodontics; Technician edical University, Fuzhou 350002, ChinaTo investigate the effects of recasting on the castability of nonprecious ceramic alloy. Methods The nonprecious ceramic alloy es in argon protection ic alloy ined by the ability of the alloy to cast a mesh pattern made from ined to determine the total number of filament segments that ic alloy. Results There 1st to 5th generation castings, ic alloy in argon protection(P 0.05).There ic alloy, es. KEY osleh I,Abdul G F,Farghaly A. Castability evaluation and effect of recasting of ceramometal alloys(abstract)J. Egypt Dent J, 1995,41(4):13571362. 4 隋 磊,王少安,巢齐宇,等. 再利用镍铬钛烤瓷合金的铸流性及元素分析J. 口腔颌面修复学杂志, 2006,7(1):3050. 5 李旬科,张寿华,沈丽娟,等. 贵金属烤瓷合金反复多次熔铸后金相比较观察J. 口腔医学研究, 2002,18(5):310312. 6 程 辉,陈 南,陈百欣,等. 牙科用非贵金属高熔铸造合金铸造前后金相比较观察J. 口腔医学纵横杂志, 2000,16(3):225226. 7 张寿华,李旬科,王忠义,等. 贵金属烤瓷合金废料再利用后铸件力学性能测试研究J. 现代口腔医学杂志, 2003,17(2):150151. 8 Hinman R ,Hero H. Mold filling of Ti castings using investments eabilityJ. Dent Mater J, 1995,11(1):1418. 10 Takahashi J,Zhang J Z,Okazaki M. Effect of casting methods on castability of pure titanium J. Dent Mater J, 1993,12(2):245252. 11 O’Connor R P,Mackert J R，Jr Myers M L,et al. Castability,opaque masking,and porcelain bonding of 17 porcelainfusedtometal alloysJ. J Prosthet Dent, 1996,75(4):531534. 12 Bezzon O L,de Matto M,Ribeiro R F,et al. Effect of beryllium on castability and resistance of ceramomental bonds in nickelchromium alloysJ. J Prosthet Dent, 1998,80(5):570574. 13 Mirkovic N. Effect of recasting on the elastic modulus of metalceramic systems from nickelchromium and cobaltchromium alloysJ. Vojnosanit Pregl, 2007,64(7):469473. 14 邓再喜,王宝成,张少锋,等.反复熔铸对NiCr烤瓷合金机械性能的影响J .实用口腔医学杂志, 2004,20(6):743746. 15 Cohen S M,Kakar A,Vaidyanathan T K,et al. Castability optimization of palladium based alloysJ. J Prosthet Dent, 1996,76(2):125131. 16