我国现代中药提取与自动化控制特点分析(国外英语资料).doc

我国现代中药提取与自动化控制特点分析 Analysis of modern Chinese medicine extraction and automatic control characteristics How to integrate traditional Chinese medicine with world medicine is a problem that must be solved in Chinese traditional medicine industry. From the characteristics of traditional Chinese medicine, the extraction and refinement of Chinese medicine is the most important problem to be solved. The extraction of traditional Chinese medicine is the process of storing the essence and removing the dross, and it is also the key to the traditional Chinese medicine. The extraction of traditional Chinese medicine is usually water decoction, boiling 2 times, high boiling temperature, long time, energy consumption, waste. In order to solve these problems, the dynamic extraction technology of Chinese medicine is a better choice. 1 the characteristics of the dynamic extraction of Chinese Medicine The so-called Chinese dynamic extraction, is needed to extract the herbs first about O.5 ~ 1.0cm size, add water preheating 30min, at 95 to 98 DEG C, stirring extraction 1H, centrifugal filter, pressure slag, filtrate, concentrate. The dynamic extraction process has the following characteristics: (1) the specifications of the medicinal materials are small, the extraction is sufficient, the extraction time is shortened, and the production efficiency is greatly improved. In the dynamic state, the extracted material is heated uniformly, the temperature of the material in the tank is the same, the whole extraction process keeps a constant temperature, and the quality of the liquid medicine is improved. After the multistage separation of the liquid medicine, the high quality extract liquid is obtained, which creates favorable conditions for subsequent enrichment, alcohol precipitation and drying. The amount of water contained in the slag is less than 15%, and more than 15% to 20% of the liquid in the multifunctional extraction tank. Therefore, the paste rate can be increased. Because it is