CAD图层颜色标注(国外英文资料).docVIP

CAD图层颜色标注(国外英文资料) Wall layer, door and window layer, furniture layer, word mark layer, filling layer description text 0.4mm solid line, 0.15mm solid line, 0.20mm solid line, 0.15mm solid line, 0.07mm solid line, 0.15mm solid line White, green, light blue, red, light gray, yellow In the use of CAD technology mapping, as far as possible to use color (COLOR) to control the width of the drawing pen, as far as possible less use of PLINE lines, such as width of the line, to speed up the graphics display, reduce graphics files. Wall layer, door and window layer, furniture layer, word mark layer, filling layer description text 0.4mm solid line, 0.15mm solid line, 0.20mm solid line, 0.15mm solid line, 0.07mm solid line, 0.15mm solid line White, green, light blue, red, light gray, yellow Naming rules for 7.2.1 drawing files: The CAD file name should be simple, easy to remember, Liao Ming, data exchange. The design drawings may be named in order of design, work type, and drawings: Decorative construction plans for Z1, Z2... The initial design adds C, such as ZC1 and ZC2... ; Electrical for E1, E2... The initial design adds C, such as EC1 and EC2... ; Water supply and drainage for S1, S2... The initial design adds C, such as SC1 and SC2... ; The ventilation is H1, H2... The initial design adds C, such as HC1 and HC2... etc. 1 order of construction drawings: 1, map cover 2. Design instructions 3. Drawings catalogue 4. Decorative construction drawings (floor plan, top view, elevation, sectional drawing, structural node diagram, detail drawing) 5, to the level of construction drawings, drainage plane reconstruction drawings 6, electrical reconstruction drawings 1 drawings, fonts: In addition to the bid and its special circumstances, the following font files should be taken as far as possible without using TureType fonts to speed up graphical display and reduce graphics files. There should be no more than four fonts in the same graphic file. The following font files are standard fo