TC14钛合金大型机匣采用等温锻造生产小余量锻件.pdfVIP

第 38 卷 增刊 Vol.38 Suppl. 令品 营 地 2002 年 9 月 362-363 页 ACTA METALLURGICA SII\I CA Sept. 2002 pp. 362- 363 TC14 铁合金大型机匣采用等温锻造生产小余量锻件* 庞克昌周建华孟笑影周边 (宝钢集团五钢有限公司，上海 200940) 摘 要 TC14 铁合金机厦是-个难度极高的绩件.采用等温镶造工艺，将半个饥度作为一个集体缎件进行fI选取得 f成功.本 文介绍了用模拟法研究锻件的成形.以及等温俄选工艺‘热处理工艺对俄件组织、性能的影响.介绍了等温锻造的Il体饥硬的高低 倍组织与为学位能 关键词 TC14 钦合金衍l昆等温饿造 中回法分类号 TG319 文献标识码 A 文.编号 0412-1961 (2002)S - S362-02 THE SMALL ALLOWANCE FORGING OF TC14 ALLOY CARTRIDGE RECEIVER PRODUCED BY ISOTHER如lAL FORGE PANGK饥hang， ZHOU Jianhua, MENG X iaoying, ZHOU Shi B缸刷刷 Group Sbangh剧 No.5 Steel Co. Ltd. , Sbangbai 2∞940 Correspondeπt: PANG Kechang, professor, Tel: (021 Fax: (021 E-mail: Pangkc @sh163.net Manuscript r配eived 2002-{1:!-25 ABSTRACT Cartridge receiver made up of TC14 alloy, although difficult to be forgcd , has been successfully produced by isothermal forging wíth the treatment of half of the cart rídge receiver as a whole . This article deals with the research on analogue formation. The effects of isothermaJ forging process and heat treatment on the structure and mechanical properties，相d a 150 the macro micro structure and mechanicaJ properties of the whoJe receiver isothermally forged , have been introduced. KEY WORDS T C14 alloy, cartridge receiver , isothermal forging TC14 钦合金机臣小余萤锻件是一个难度极高的母董 为丁得到尺寸合格的锻件，首先设计了尺寸为 1:4 的 仲.其，尺寸大= φ730 mmx430 mm，展开时投影 模拟模具，进行了成形筷拟试验从模拟试验的结果来看， 2 丽积达 4500 cm ， 我因现有条件下来用常规锻造是无法 采用等混锻造工艺，选择合适的预锻坯，完全能得到尺寸 生产的.其二，要求加工余最小，提高材料利用率. 原件 合格的锻件.