航空宇航制造基础考试知识点(国外英文资料).docVIP

航空宇航制造基础考试知识点 DOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Fundamentals of aerospace manufacturing, aerospace manufacturing, examination, knowledge points, aerospace manufacturing Basics The knowledge content and basic requirements of knowledge content knowledge points: aerospace technology base, metal cutting principle, equipment and technology of aerospace equipment manufacturing, mechanical machining surface quality and machining precision, manufacturing and assembly process of mechanical machining, etc.. Basic requirements: basic knowledge and basic knowledge of aerospace technology basis and mechanical manufacturing engineering, understanding the basic principles and understanding the current development of advanced manufacturing technology. The first part is the basic of Aerospace Technology 1, master: vehicle classification, structure and function; and attack angle and the basic concept of airfoil stall; the basic concept of the first and the second and third speed of the universe; the basic concept of six orbital elements and method diagrams; influencing factors of aircraft lift and lift formula application; produce and resistance reducing measures of aircraft resistance (including high and low speed aircraft); different shapes for the effects of shock wave; the basic concept of maximum flying speed, range and static ceiling; the classification and characteristics of the aircraft engine; the composition and working principle of turbojet aircraft; the basic structure, geometry and parameters; General requirements of aircraft structure; the basic composition and the winged missile each part of function; 2, understand: the flow characteristics of low speed and high speed airflow generation process; the three principles of the wing lift; lift; rocket The separation of combination and between solid and liquid rocket engine; advantages and disadvantages; con