纵向磁场控制高效MAG 焊接工艺的试验研究 - 河北科技大学学报.PDF

31 3 Vol. 31, No . 3 20 10 6 Journal of Hebei University of Science and T echnolo y June 20 10 : 1008- 1542( 2010) 03-0205- 04 MA G 王 军, 王会霞, 梁志敏, 胡云岩 ( 河北科技大学材料科学与工程学院, 河北石家庄 0500 18) : 基于高速摄像的研究手段, 对纵向磁场 制下的MAG 焊旋转射流过渡过程的稳定性以及 焊接工艺性等方面进行试验研究结果表明, 外加纵向磁场可以有效 制M AG 焊接的旋转射流 2 过渡过程, 在送丝速度为45 m/ min保护气体为80%( 体积分数) Ar+ 20% ( 体积分数) CO 时, 可 得到稳定性好可 性好的旋转射流过渡, 大大提高焊接生产效率 : 纵向磁场; 高效M AG 焊接; 旋转射流过渡 : T G444. 77 : A Experimental study on hi h performance MA G w eldin process controlled by lon itudinal ma netic field WAN G Jun, WANG Hu-i x ia, LIANG Zh-i min, HU Yun-y an ( Colle e of Material Science and En ineerin , H ebei University of Science and T echnolo y , Shijiazhuan H ebei 050018, China) Abstract : Based on hi h-speed photo raphy, experimental study on the stability of rotatin t ransfer and w eldin process under the control of lon it udinal ma net ic field is discussed. And the results show that the process of rotatin t ransfer can be con- t rolled by the additional lon it udinal ma netic f ield. Under the shieldin as of 80% Ar + 20% CO , a stable and better con- 2 t rolled rotatin t ransfer is realized w ith the wire feed speed of 45 m/ min. T hus the meltin efficiency of the w eldin materials increases obviously . Key words: lon itudinal ma netic field; hi h performance M AG; rotatin transfer MAG [ 1] , , , 1 1. 1 , 20 mm Q235 1. 2 mm H08M n2SiA , 3 000 / s, , 1 : 2009- 12-03; : 2010- 03-02; : : ( 1968- ) , , , , , 206 2010 表1 对比试验规范参数