钢筋及钢筋砼（国外英文资料）.docVIP

钢筋及钢筋砼 Recommended Keywords: building specifications, engineering quantities, calculation rules -------------------------------------------------------------------------------- Explain This chapter is divided into concrete and steel, cast-in-place components, templates, prefabricated components, templates, structures, individual parts of the template, prefabricated joints, irrigation joints of five sections. I. concrete Only 1. concrete column C20 gravel, C20 rubble and C30 prestressedtensioned and C30 prestressed post tensioning section, when used according to the different grade can be included in the design. 2. the loss rate of concrete is 1.5%, which is 0.2%, transportation 0.8%, molding 0.5%. 3. Appendix 1 of the consumption quota lists the tables of the common strength grades of concrete for reference. Two, steel 1., within B5 steel to spot welding. 2. the embedded iron parts take into account the welding factors in all cases. 3. this chapter apply the corresponding reinforcement cage reinforced section, and on the basis of per ton increase of 30KVA AC welder 0.9 classes, 3.5kg welding rod, the other no adjustment. 4. prestressing steel bars include the contents of each process of pre stress of steel bar. Three, templates The 1. section is the template according to the different situation, considering the tool type steel template (shaped steel formwork), composite steel formwork, formwork, brick, brick and concrete mode of long line pedestal etc.. 2. cast-in-place reinforced concrete template section, the storey is considered as 3.6m (including the 3.6m). When the design height is more than 3.6m, the calculation of the super high formwork increases the consumption of quantum meshes. The beam and plate are combined with the height of the column of Liang Banchao, and the wall and column are combined with the columns of the wall column. As quantum dots do not apply to increase the consumption of the tailgate, pick, along the gutter, stairs and building components