商场现代化 期刊发表论文的介绍概要1.pptVIP

Engr 0012 (03-1) LecNotes 01 Engr 0012 (04-1) LecNotes 06-01 ca05 review - problem solving Problem Statement #1: A cable of length l0 is needed to suspend an object of mass mobj from the ceiling. The load, T = mobjg, is the force that the mass exerts on the cable. The deflection (elongation) of the cable under the load must be less than ?lmax. Ignoring the mass of the cable (mcable, which adds to the load), what cable mass is required to just support the load without permanent deformation? step 1: draw a sketch!!! ceiling l0 mobj T = mobjg needs l0 mobj ?lmax 学分网 Engr 0012 (04-1) LecNotes 06-02 step 2: review relevant engineering stress-strain problem: S = Ee stress strain elastic (Young’s) modulus permanent deformation when S Sy looking for mass of cable material property look it up add to needs list need equation for volume A0 l0 Engr 0012 (04-1) LecNotes 06-03 step 2: review relevant engineering already on needs list need equation can calculate T = mobjg need value use Sy add to needs list needs list l0 mobj ?lmax ? Sy Engr 0012 (04-1) LecNotes 06-04 step 3: restate problem Design a MATLAB script to find the minimum mass of a cable required to support an object hanging from a ceiling given the mass of the object, initial length of the cable, maximum deflection, cable density, and cable yield stress. step 4: algorithm 1. Ask user for mass of the object, initial length of the cable, maximum deflection, cable density, and cable yield stress. 2. Compute mass of cable. 3. Report mass of cable. Engr 0012 (04-1) LecNotes 06-05 step 5: expand step 2 of algorithm 2. Compute mass of cable. a. Compute tension. b. Compute cable diameter. c. Compute cable volume. d. Compute cable mass. Engr 0012 (04-1) LecNotes 06-06 ca05 review - problem solving Problem Statement #2: My boss at the Internal Revenue Service (IRS) has asked me to develop a program that will determine how much taxes are due based upon a taxpayer’s annual