风管及风管附件 Duct and Fitting.docx

BMW Brilliance Automotive Co., Ltd. BBA 19.88 Plant – 30U-RD Center 7 SoW Specifications B 53 Duct and Fitting 30U RD Center- B53 Page  PAGE 27 October 2012 7.10 B53 - Duct and Fitting 风管及风管附件 PART1-GENERAL 第一节 一般规定 1.1 RELATED DOCUMENTS 相关文件 1.1.1. Drawings and Condition of Contract, including General and Particular Conditions. 图纸与合同条件，包括通用与特殊条款。 1.1.2. Planning Guideline Technical Risk Management – BMW Group All the equipment supply and installation (including all equipment and materials) shall meet relevant requirements of BMW GROUP’s Planning Guideline Technical Risk Management 所有的设备及安装必须满足 BMW Group 的 《Planning Guideline Technical Risk Management》-〈策划指引及技术风险管理〉的中相关要求。 1.1.3. BBA plant 19.88 Shenyang/Tiexi FLS Facilities Labeling System All labels shall be added according to BMW ’s requirements. Label shall be made according to relevant technical requirements attached in BBA plant 19.88 Shenyang/Tiexi FLS facilities labeling system.pdf. 标牌应按附件中BBA plant 19.88 Shenyang/Tiexi FLS Facilities Labeling System等相 关的技术要求制作。 1.2 STANDARDS AND CODES 标准规范 1.2.1 《Code for design of heating ventilation and air conditioning 》GB50019-2003 《采暖通风与空气调节设计规范》GB50019-2003 1.2.2 《Code for design of building fire control》GB50016-2006 《建筑设计防火规范》GB50016-2006 1.2.3 《 Specifications for the design of noise control system in industrial enterprises 》 GBJ87-85 《工业企业噪声控制设计规范》GBJ87-85 1.2.4 《Emission standard for industrial enterprises noise at boundary》GB12348-2008 《工业企业厂界环境噪声排放标准》GB12348-2008 1.2.5 《Hygienic standards for the Design of Industrial》GBZ1-2002 《工业企业设计卫生标准》GBZ1-2002 1.2.6 《Code of acceptance for construction quality of ventilation and air conditioning works》 GB50243-2002 《通风与空调工程施工质量验收规范》GB50243-2002 1.2.7 《Code of acceptance for construction quality of water supply drainage and heating works》GB50242-2002 《建筑给排水及采暖工程施工质量验收规范》GB50242-2002 1.2.8 《Code of acceptance for construction of refrigeration plant and air separation plant installation》GB50274-2010 《制冷设