废纸的碎解与疏解（The shredder and dissolving of waste paper）.doc

废纸的碎解与疏解（The shredder and dissolving of waste paper） The dissociation of waste paper fiber is mainly based on the broken solution of the hydraulic pulping machine. 1. The hydraulic shredder dissolves The hydraulic shredder was created in 1938 by Black Clawson, a company called B.C. In 1959, B.C developed a Vokes Rotor that effectively crushed waste paper, but it was high in electricity. In 1973, the biggest company introduced Power SaverVokes Rotor, which are still popular all over the world of p. v, Rotor, the Rotor can produce strong backflow effect, therefore, high breaking capacity, low Power consumption, countries have their own production of waterpower pulp machine now, but the majority of Rotor structure type in p. v, Rotor for the prototype. FIG. 9-2 is the p.s-type vex rotors. (1) the role of hydraulic shredder The main dissociation fiber plays the role of the hydraulic shredder in the waste paper shredder, and also has the initial separation to remove the important impurities. In the process of dissolving, the original strength of the fiber should be kept as far as possible, so that the material attached to the fiber will be separated, but not too much debris will be broken into pieces, which will be removed later. Deinking is also from the hydraulic shredder, in the hydraulic pulping machine, deinking agent and curing, the ink from the fiber surface is fully and dispersed out, this is the hydraulic shredder of the other - action. (2) characteristics of various types of hydraulic pulping machines The hydraulic shredder has vertical and horizontal, continuous and intermittent, high concentration and low concentration. Their schematic diagram is shown in figure 9-3 to figure 9-7. The action of the hydraulic pulper is based on the flow of the rotating rotor (the circumference of the circumference of 900 ~ 1100m/min) to break up the waste paper. The rear of the rotor (horizontal) or below (vertical) is the sieve plate The size of the mesh is about 4 ~ 25mm, an