监理 继续教育20130527（The supervisor continued education 20130527）.docVIP

监理 继续教The supervisor continued education Problem 1 (2) GB 50369-50369 long oil and gas pipeline engineering construction and acceptance standard regulation, with cable trench buried pipelines installation, the minimum clearance (refers to two section of vertical projection interval) should not be less than (B). A. 0, 2m B. 0, 3m C. 0, 4m D. Zero, 5m Problem 2 (2) GB 50369-50369 long oil and gas pipeline engineering construction and acceptance standard regulation, the end of the pipeline pressure testing, pigging with hygroscopic agent, dry mixture of pipe ends after discharge, methanol, glycol content of hygroscopic agent quality percentage is greater than (C) for qualified. A. 60% B. 70% 80% C. D. 90% Topic 3 (2) GB 50235-50235 industrial metal pipeline engineering construction and acceptance standard regulation, the tube cutting, the pipe surface should be smooth, no cracks, double skin, burrs, protruding sunken, shrinkage, slag, oxide, iron filings, etc. The oblique deviation of the end face of the incision should not be greater than the diameter of the tube (B) and must not exceed 3mm. A. 0.5% B. 1% 1.5% C. D. 2% Problem 4 (2) GB 50369-2006 the test of gas pipeline construction and acceptance specification, all welded joints shall be 100% girth (D). A. liquid penetration detection B. Tensile strength test C. Full test D. nondestructive testing Topic 5 (2) SH/T 3532-3532 code for construction and acceptance of the petroleum and chemical heat exchange equipment, pressure test should be done when the heat exchange equipment, must be approved by the (B) the safety technical measures, and safety supervision in the process of pressure testing. A. technical director of construction unit B. general manager of construction unit technology C. Responsible person of the supervising unit D. construction unit project manager Problem 6 (2) GB 50169-2006 the grounding of the electrical installation engineering grounding device construction and acceptance spe