硬质合金（carbide）.docVIP

硬质合金（carbide） Company sells the zhuzhou diamond, zigong, the Great Wall of various cemented carbide products, production of cemented carbide machine clip blade, CNC blade, welding blade, fine grinding, milling insert, geological mining, alloy plate, alloy, alloy round bars, tungsten carbide welding rod and various non-standard products. YT15 (P10) hardness is greater than the semi-fine vehicle and fine car for the continuous cutting of carbon steel and alloy steel. The fine car of the intermittent cutting. The hardness of YT14 (P20) is greater than 90.5, which is suitable for the rough car of the continuous cutting of carbon steel and alloy steel, the semi-fine car and the fine car, the continuous thick milling, the expansion of the cast hole, etc. YT5 (P30) hardness is greater than 89.5 for carbon steel and alloy steel (including forgings, stamping parts and skin of castings). Coarse plane, semi - fine plane, rough milling, etc. YG8 (K30) is greater than 89.0 for cast iron, non-ferrous metal and its alloys, non-metallic materials not flat surface and discontinuous cutting, rough plane, rough-milling, general hole and deep hole drilling and reaming. YW1 (M10) hardness is greater than 91.5 materials suitable for heat resistant steel, rigid steel, stainless steel and alloy steel etc., which are also suitable for processing of ordinary steel and cast iron. YS25 (P25) hardness is greater than 90.5 for carbon steel, cast steel, high manganese steel, high strength steel and alloy steel, milling and planing. YG6X (K10) hardness is greater than 91.0 suitable for alloy cast iron. YS8 (M05) hardness is greater than 92.5s for iron base, nickel base high temperature alloy, high strength steel, cold hard cast iron, heat-resistant stainless steel, high manganese steel, quenching steel. The hardness of YG8N (K20K30) is greater than 90 for the rough machining of cast iron and non-ferrous metals, and also for the machining of stainless steel. YT30 YS30, YG6A, YG3, YG3X, YW2, YD777 a