激励器的应用（Actuator applications）.docVIP

激励器的应用（Actuator applications） In the existing electronic field production (EFP) in the audio system, how to enhance the wireless microphone audio activity, improve voice clarity, eliminating the analog tape to improve voice sound processing sibilance, audio professionals is very concerned about the issue. In practice, we use the auditory exciter to improve the processing ability of the system and achieve the purpose of improving the quality of EFP audio. Actuator and its system access At present, there are audio Exciter (Aural), excitation processing software and excitation circuit in audio signal processing. Among them, the professional auditory exciter is more suitable for EFP. The harmonic signals excited by the auditory exciter are simulated and can be simulated by artificial reverberation to simulate the acoustic characteristics of the auditorium. Therefore, we should not simply regard this artificial harmonic generation as the original signal untrue and be equivalent to distortion. The purpose of the actuator is to restore the harmonic components lost by the audio signal, effectively expand the high frequency bandwidth and improve the signal-to-noise ratio, thereby enhancing the clarity and expressiveness of the sound reproduction. Moreover, the levels of these harmonics are very low and have little impact on the power of the signal. Because the actuator has these advantages, it can improve the sound quality by using it to process the signal. In practice, we use Aphex Aural Exciter- III -250 (referred to as Ax-, III, -250) professional auditory exciter. Ax- III -250 dual channel processor, each channel contains the same two audio path, that is, the main signal path (Main Path) and the adjacent chain driven signal path (Sidechain Path). The main path sends the audio signals from the input stage directly to the output stage, essentially without any processing; the side path contains all the heart circuits of the exciter. The two audio signals are mixed at the ad