技术贴-存储器相关知识（Memory related knowledge）.docVIP

技术贴-存储器相关知识（Memory related knowledge） First of all thank you for your reply. In addition Baidu. I found the answer: Q A: why do you want to set SWAP into your mobile home flash? Today saw a friend said: SWAP virtual memory on the phone will damage the phone RAM, it is recommended or SD card partition, SWAP will be opened on the SWAP partition.. I cant help it. I dont want to say RAM in this net friend. At least I cant let pseudo professional mislead my friends! I decided to come out and do it. Start with my point of view - SWAP as much as possible on the phone. The reason is as follows: first popularize some basic concepts and common sense error correction. Concept 1 RAM: random access memory, fast speed, namely the loss of data stored in flash power, almost does not affect the life. The main categories are DRAM and SRAM. DRAM (dynamic RAM) - PC in memory of the memory card particles, particles, or hard disk cache chip. SRAM (static RAM) - a class of processors integrated with CPU, one level cache, two level cache, three level cache, etc., faster than DRAM, but with very little capacity! Concept two ROM: read only memory, which is characterized by the fact that once it is stored, it cannot be changed or deleted. Now almost invisible, the structure only exists in some chips, the internal storage brand model, a small part of the structure. If you play the NES era is over, you remove the red and white machine with a PCB will see the Leather Cream, that is the ROM, or a small lens chip, called EPROM (erasable programmable read-only memory, the UV Lens holes will empty the data in RAM), then BIOS chip Pentium times before and after PC are erasable programmable read only memory (EEPROM CMOS in the South Bridge in existence, with only a few hundred bytes of RAM form so BIOS chip can call CMOS chip). Flash Memory: flash memory, power down data can also be saved. Strictly speaking, flash memory is an evolutionary form of ROM, but not ROM, functionally similar to electronic