不同纳米材料对钛-瓷结合强度的研究.pdfVIP

· 葡技术 · J Med Res，June 2008，Vo1．37 No．6 不同纳米材料对钛一瓷结合强度的研究 练方明 沙 焱 摘 要 目的 探讨表面涂附不同纳米材料对钛一瓷结合强度的影响，为临床应用提供依据。方法 应用医用钛(TA2)为 原料，表明涂附纳米SiO 、纳米金介质、纳米钯介质，以对照组作为参考；采用扫描电子显微镜及电子探针检测界面形貌及元素扩 散情况，并采用电子万能测试机检测其结合强度变化。结果 在TA2表面涂附纳米 SiO 可以显著提高上瓷后的钛 一瓷结合强 度，涂附纳米金介质也可以提高其结合强度，但涂附纳米钯介质无作用。结论 在制作钛瓷合件前，表面涂附纳米SiO 能提高 钛瓷结合强度，可以作为临床应用。 关键词 纯钛 纳米材料 钛瓷界面 强度 Study on the Interface of Ti—porcelain Fused Under Different Nanomateria．Lian Fangming，Sha Yan．Department of Stomatology，The Second People’S Hospital of Dazhou，Sichuan 635000，China Abstract 0bjective This study was made to observe the effect of different surface treatment pure titanium on bond strengt of pure titanium and porcelain，and find the mechanism as basisi of clinic use．Methods Dental pure titanium(TA2)was choosen as material， before applied for porcelain the rest groups were treat as followings：the metal substrate surface was smeared with Nano—scale material (nano—SiO2，nano—gold and nano—palladium particles)，compared with control group，and find the change of bond strengt．The change of bond strengt in the Ti—porcelain interface area were observed with scanning electron microscopy(SEM)and electron probe mi— croanalysis(EPMA)respectively．Results Before applied for porcelain，the metal substrate surface was smeared with nano—SiO2 and nano—gold particles，we acquired a positive effect to increase the bonding strength，while using nano—palladium particles has a negativee ffect．Conclusion The bonding strength was enhanced when the metal substrate surface was smeared with nano—SiO2 before applied for porcelain，SO we adviced that it should be used in practice as a try． Key words Pure titanium；Nanomateria；Ti—porcelain interface；Bond strengt 钛(titanium，Ti)及钛合金具有优良的生物相容性、耐腐 厂)、CENTURION烤瓷炉(德国)、电子万能测试机(山东济 蚀性及理想的物理、机械性能，而且资源丰富价格低廉，能满 南)、扫描电镜(美国)