carburetor installation and tuning - ultima …（化油器安装和调优-天涯u2026）.pdf

See /pdfinstruct.html for latest publications. CARBURETOR Installation and Tuning 2.063in (52.4mm)Ø Bore 1.750in (44.5mm)Ø Ventruri 1.875in (47.6mm)Ø Bore 1.563in (39.7mm)Ø Ventruri WARNING: Serious injury, death and property damage can result from the improper use, control alteration or maintenance of motorcycles. The dealer and dealers customers must exercise good judgment in the use, control, alteration, part selection and installation, and maintenance of motorcycles. ULTIMA® Company LLC has no control over the judgement of others and as- sumes no responsibility or liability of any nature for the failure of others to use good judgment. ULTIMA® Company LLC is the copyright owner of all text, ULTIMA® CARBURETOR images, and other material contained on this document. Page 1 See /pdfinstruct.html for latest publications. Installing your new ULTIMA® carburetor: Inspect your new carburetor: -Make sure the correct throttle cable bracket is installed with thread locker. -Make sure all bolts are secure. -Make sure the flange mount o-ring is installed. -Check for smooth butterfly rotation and motion. If you know what jets are needed for your displacement skip to the tuning section. ULTIMA® Carburetors use a flange mount in- take manifold system. The insulator block (sold separately) should go between the intake manifold and the carburetor (figure 1).