数控加工程序（Nc program）.docVIP

数控加工程序（Nc program） Example 1.g01 line interpolation instruction programming The FUNAC CNC car is programmed as follows: O9001 N10 x 100 Z10 (define the position of the point of the knife) N20 G00 x 16 Z2 M03 (move to chamfer extension cord, Z axis 2mm) N30 G01 U10 W - 5 G98 F120 (3 x 45 ° Angle) N40 Z - 48 (machining cylindrical Φ 26) N50 U34 W - 10 (cut the first cone) N60 U20 z-73 (cut the second cone) N70 X90 (return knife) N80 G00 x 100 Z10 (back to the point of the knife) N90 M05 (main shaft stop) N100 M30 (end of main program and reset) Example 2. G02 / G03 circular interpolation instruction programming, The FUNAC CNC car is programmed as follows: O9002 N10 X40 Z5 (define the position of the knife point) N20 M03 S400 (spindle is rotated 400r/min) N25 G50 S1000 (spindle maximum speed limit 1000r/min rotation) N30 G96 S80 (the constant linear speed is 80m/min) N40 G00 X0 (knife to center, rising speed until the main shaft to maximum speed) N50 G01 Z0 G98 F60 (work in contact workpiece) N60 G03 U24 W - 24 R15 (machining R15 circular section) N70 G02 X26 Z - 31 R5 (machining R5 circular section) N80 G01 Z - 40 (machining cylindrical Φ 26) N90 X40 Z5 (back to knife point) N100 G97 S300 (cancel the constant line speed function, set the main axis in 300r/min rotation) N110 M30 (main shaft stop, main program end and reset) Example 3 G32 thread cutting instruction programming Format: G32 X (U) __Z (W) __F__ Description: X, Z: for absolute programming, the coordinate of the effective thread endpoint in the workpiece coordinate system; U, W: for incremental programming, the effective thread ending is relative to the displacement of the starting point of the thread. F: thread guide, which is the value of the tool relative to the workpiece in each turn of the spindle; Use G32 instructions to process cylindrical threads, taper threads and end - face threads. The thread guide is 1.5mm, Each bite (diameter) is respectively 0.8mm, 0.6mm, 0.4mm, 0.16mm, The FUNAC CNC car is pro