公路实务案例1（Highway practice case 1）.docVIP

公路实务案例1（Highway practice case 1） Rolling from the inner shoulder to the outer shoulder. Case two background A construction enterprise is a general contracting enterprise for highway engineering, with a registered capital of 120 million. The company intends to bid on a highway project, the highway engineering design according to highway standards, design speed of 100 kilometers road, embankment, filling gravel subbase, inorganic binder base and asphalt concrete surface layer, two-way four lane. The highway project will be invested 3 billion 500 million. problem 1. what are the main construction machinery that may be used in the construction of this highway project? 2. what are the principles and methods of selecting mechanical equipment? 3. after the completion of the subgrade needs to be tested, what are the earthworks subgrade inspection items? 4., after the completion of the entire project needs to be checked and accepted, highway engineering acceptance is divided into two steps? What are the conditions for the completion of the acceptance? 5., the general contracting enterprise of highway engineering is divided into several grades Can the construction enterprise undertake the highway project? Why? What is the scope of the contract for the construction enterprise? Main points of answer: 1. for the highway engineering construction, the main construction machinery may be used: bulldozers, loaders, excavators, scrapers, graders, road rollers, drilling machine and stone crushing and screening equipment, asphalt concrete paver. 2. Principles: adaptability, progressiveness, versatility and specificity; better economy; reasonable mechanical combination; renewal and utilization; safety. Methods: the construction machinery was selected according to the quantity of the works: 3, compaction degree, deflection value, vertical height, midline deviation, width, smoothness, transverse slope and side slope 4, acceptance and final acceptance. 1) the inspection and acceptance of ea