网络端口（Network port）.docVIP

网络端口（Network port） Network port.Txt I do not expect anything, only hope you later woman one as good as one. I remember when ah, hot days when I can be like a shirtless man! Ping command and network port: 1.Ping is the local loop address, and the Ping rule states that the TCP/IP protocol works normally, otherwise TCP/IP is not normal. 2.Ping native IP address Use the IPCONFIG command to view the IP address of the machine, the Ping IP address, and if Ping, the network adapter (NIC or MODEM) is working properly, otherwise it is not normal. 3.Ping same network segment computer IP address Ping general description of the network line failure, such as network and router, you should first Ping router in the network port IP address, not the line in question, the general Ping routers subnet in the target computers IP address port, no routing at fault, then through Ping IP to machine address. 4.Ping URL If you want to check for a network with DNS services (such as Internet), in a step Ping on the target computer after IP, still unable to connect to the machine, you can Ping the network name, under normal circumstances will appear in the URL to IP address, which indicates that the machine DNS. The correct and DNS server is working properly, it may be one of them fails; can also through the fault detection of WINS Ping computer name resolution (WINS is the computer name to IP address service.). 18 basic knowledge of computer port: Basic knowledge of computer ports Ports can be divided into 3 broad categories: 1) ports (Well Known Ports): from 0 to 1023, they are tightly bound to some services. Usually, the communication of these ports clearly indicates a protocol for a service. For example: port 80 is actually always HTTP communication. 2) registered port (Registered Ports): from 1024 to 49151. They are loosely bound to some services. That is, many services are bound to these ports, which are used for many other purposes as well. For example, many systems deal with dynamic por