节能灯qc检测及国标参考（Energy saving lamp QC detection and national standard reference）.doc

下载文档 降价啦

6
0
约 7页
2017-08-04 发布于河南
举报
版权申诉
保障服务

节能灯qc检测及国标参考（Energy saving lamp QC detection and national standard reference）.doc

1、本文档共7页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。

节能灯qc检测及国标参考（Energy saving lamp QC detection and national standard reference） Electronic energy-saving lamp quality QC inspection is mainly pay attention to the appearance and performance test of energy-saving lamp is normal: A. Appearance detection 1. Detects whether the product color is consistent with the production, there is no color mixing, the measured power has not reached the standard process. 2. If there is leakage tube, the lamp tube is black, macular, crooked tube, loose tube, mixing tube, powder, clean, whether there is leakage of plastic tube. 3. If there is a pressure cap in place, whether the line, if there is rust or cap deformation with a hole (incoming material). Solder or conductive cap (free welding cap) is good. 4. The plastic parts are damaged, the plastic surface color is spotted (more than 2MM) are bad products, each company may have different demands, the plastic cover is in place, the surface is clean, the surface of silk screen or whether the carving is consistent with the products (power, power factor, current, voltage, etc.). 5. The lamp or whether there is material in central. Two. technical parameter 1. Optical parameters, light efficiency, light, color temperature, color rendering index (2700-6400), chromaticity coordinates 2. The electrical parameters, tube voltage, tube, power supply voltage, Start voltage, power, power factor 3 (0.55-0.95). Life (greater than or equal to 4 8000H). Torque (E27 3NM E14 lamp torque lamp torque 1.15NM E40 lamp torque is 5NM 2. The packing conforms to the production standard, packaging box marks are correct. 3. label, bar code, product code and other times correctly, can not be missed. The reference lamps gb: GB 7000.218-2008 luminaires - Part 2-18: Particular requirements - Luminaires for swimming pools and similar places GB 7000.217-2008 luminaires - Part 2-17: Particular requirements for stage lighting, television, film and photographic studios (outdoor and indoor) lamps GB 7000.212-2008 luminaires -