SL RC400程序设计.docVIP

SL RC400程序设计 #include STC11F60XE.H #include intrins.h #include string.h #include main.h #include slrc400.h #include iso15693.h unsigned char xdata ini _at_ 0x7f00; // move base address to 0x7f00 unsigned char xdata *GpBase = ini; // redirect pointer to base address #define ReadRawIO(addr) (*(GpBase + addr)) #define WriteRawIO(addr,value) *(GpBase + addr) = value; extern struct TranSciveBuffer{unsigned char MfCommand; unsigned int MfLength; unsigned char MfData[64]; }; ///////////////////////////////////////////////////////////////////// //复位并初始化RC400 //注意:RC400上电后应延时500ms才能可靠初始化 ///////////////////////////////////////////////////////////////////// char PcdReset() { char status = MI_OK; char n = 0; unsigned int i = 2000; RC400_RST=0; DelayMs(50); RC400_RST=1; DelayMs(5); RC400_RST=0; while (i!=0 n!=PCD_RESETPHASE) { n = ReadRawRC(RegCommand); i--; } while (i!=0 n==PCD_RESETPHASE) { n = ReadRawRC(RegCommand); i--; } if (i != 0) { WriteRawRC(RegPage,0x80); n = 0x80; while ( (i!=0) (n0x80) ) { n = ReadRawRC(RegCommand); i--; } if (i==0 || (n0xFF)) { status = MI_RESETERR ; } } else { status = MI_RESETERR; } if (status == MI_OK) { WriteRawRC(RegPage,0x0); } return status; } ////////////////////////////////////////////////////////////////////// //设置RC400的工作方式 ////////////////////////////////////////////////////////////////////// char PcdConfigISOType() { ClearBitMask(RegControl,0x08); // WriteRawRC(RegTxControl,0x58); //100%ASK WriteRawRC(RegCwConductance,0x3f); //输出功率和操作距离调整 WriteRawRC(RegModConductance,0x05); // must be measured for 15% Modulation Index WriteRawRC(RegCoderControl,0x2f); //2e fast 2f // 52.97kHz, 1-256 coding WriteRawRC(RegModWidth,0x3F); /