路灯安全运行上的问题（Problems in the safe operation of street lamps）.docVIP

下载本文档

1
0
约 14页
2017-08-18 发布于河南
举报
版权申诉

路灯安全运行上的问题（Problems in the safe operation of street lamps）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

路灯安全运行上的问题（Problems in the safe operation of street lamps）

路灯安全运行上的问题（Problems in the safe operation of street lamps） Cap line should use the rated voltage of less than 500V copper core insulation wire. Power is less than 400W, the minimum allowable core cross section should be 1.5 square meters, power should be 2.5 square in 400W to 1000W the minimum allowable core cross section This article from: electrical home () with the source reference: /article/dgjs/2009/0630/594.html1. lighting power supply only short circuit and overload protection without leakage protection. The reason of leakage breaker, the key is to misunderstandings, some believe that the three-phase leakage circuit breaker are action dead zone, not on personal electric shock and reliable protection, rather than not; some believe that the normal leakage current may cause leakage breaker misoperation, reduce the lamp power supply reliability; some believe that due to abnormal phenomena existing in the installation of street lights for example, LED lamp line and neutral line borrowed from elsewhere, resulting in leakage breaker cannot work etc.. In fact, the leakage circuit breaker as a safety appliance, its main function is to provide indirect contact protection. When single-phase grounding fault occurs, can reduce the contact pole voltage, on the protection of personal safety is beneficial. If the leakage circuit breaker rated tripping current (I n) 200mA Rd, the grounding resistance is 200 ohms, the contact voltage of =Rd*I n=200*0.2=40V, in the specified voltage range. In the area as an example, the average soil resistivity is 110 ohms, monopolar grounding resistance Rd the measured average value is 58 ohms, if there is no leakage protection and single-phase grounding fault occurs, the contact voltage of =Un*Rd/ (Rd+R0) = 220 * 58/ (58+4) = 206V, close to the phase voltage, which is obviously divided into ten risk the. The leakage circuit breaker, can prevent cable overheating, shorten the service life of the arc current and leakage loss of electrical equip