网站大量收购独家精品文档,联系QQ:2885784924

新时达系统常见故障分析(Common fault analysis of new system).doc

新时达系统常见故障分析(Common fault analysis of new system).doc

  1. 1、本文档共10页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
新时达系统常见故障分析(Common fault analysis of new system)

新时达系统常见故障分析(Common fault analysis of new system) Common fault analysis of new system The 32 step analysis system in elevator fault First, the reasons for not open the door when the overhaul: 1, the F64 parameter is not set to 1; 2, open door area signal is not (F130 = 0, as long as there is a flat switch action, there should be gate area signal; F130 = 1, there must be independent gate switch input); 3, you can open the floor settings parameters wrong; 4, open limit signal error (input point normally open / normally closed setting error, switch or wiring error); 5, the door button signal is not received. Two, the maintenance can not be closed: 1, the F64 parameter is not set to 1; 2 、 error of closing limit signal (input point normally open / normal setting error, switch or wiring error); 3, safety touch plate switch action or input point normally open / stop setting error; 4, the closing button or up and down button signals are not received. Three, when the door can be closed, but not automatically closed (even press the closing button) reasons: 1 overload switch action or the input point normally open / stop setting error; 2 communication failures between the motherboard and the car board; 3, if the software version number is 01F3TV053 and the updated version, there may be no driver: the elevator is in full or a driver bypass state, the operation of the elevator car in front of the instruction signal is not registered; 4, driver or independent state, no command and call signal registration, so the elevator does not run direction; 5, no driver status, open the door button often action; 6, F163 is set to have a function extension board, but it doesnt actually feature the extensions board (01F3TV053 and newer versions); 7, seismic detection of function expansion board, building emergency power supply detection, or power failure emergency flat level device operation detection input point misoperation (01F3TV053 and updated version); 8, if the elevator is Schindler, th

您可能关注的文档

文档评论(0)

f8r9t5c + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:8000054077000003

1亿VIP精品文档

相关文档