双机互联（Dual computer interconnection）.docVIP

双机互联（Dual computer interconnection） Dual computer interconnection generally has the following methods: L through cable, using serial port or parallel port to achieve dual computer interconnection. L uses two network cards and twisted pairs to realize dual computer interconnection. L uses the USB port and the special USB connection line to realize the dual computer interconnection. L uses infrared to realize dual computer interconnection. L using dual Modem to realize remote dual computer interconnection. L uses 1394 lines to realize dual computer interconnection. L wireless dual computer interconnection. Advantages and disadvantages of direct cable connection: The biggest advantage of this approach is simplicity, low cost, no need to buy new equipment, and only a few dollars to buy a piece of cable is enough to maximize the savings of investment. But direct cable connection due to the length of the cable is limited, so double the distance is not too far away, the general can only be placed in the same room; secondly, two computers can access each other when the frequent need to re set the main machine, very troublesome; third, slower connection rate between computers, applies only to common file transfer, or even the simple game machine. Use serial port (parallel port) cable for dual computer interconnection: First of all, ready to connect the cable, serial or parallel lines need a line. The cable can produce their own, including 9 to 9 pin serial line the most simple, only 3 connections, with the methods of 2-3, 3-2, 5-5 welding can; 9 for 25 pin serial line using the method of 2-3, 3-2, 5-7 25 for welding; 25 pin serial line method using 2-3, 3-2, 7-7 welding. Parallel lines need 11 wires connected, it is more common in the computer parts market, cost less than 10 yuan, can also make their own. Welding can be done in accordance with the methods of 2-15, 3-13, 4-12, 5-10, 6-11, 10-5, 11-6, 12-4,, 13-3, 15-2 and 25-25. After doing the line, the two machines can be c