cad转mapgis（Cad转mapgis）.docVIP

cad转mapgis（Cad转mapgis） Just switch it. AutoCAD data into MapGIS MapGIS6.1 version of the AutoCAD DXF format to the MapGIS data has made great changes: first, the converted data can be significantly reduced; second, AutoCAD block into the subgraph of MapGIS, AutoCAD type (linear) into MapGIS type, and can control the AutoCAD layer and after the color transferred to MapGIS. The main steps of AutoCAD data into MapGIS system: 1. Edit the data conversion with the corresponding table file \SLIB\ directory in \MAPGIS6.1, contains several files, including arc_map.pnt, arc_map.lin, cad_map.tab, cad_map.clr are AutoCAD data to MapGIS table file (these file names are fixed, not free to change) use Notepad to open. Following each file meaning: arc_map.pnt:AutoCAD block with a MapGIS table name MapGIS arc_map.lin:AutoCAD encoding; and the corresponding encoding table; the layer number and AutoCAD cad_map.tab:MapGIS layer corresponding to the name list; color and AutoCAD cad_map.clr:MapGIS of the corresponding color table no.. Heres how to edit the four corresponding table files: 1.arc_map.pnt (AutoCAD block name and MapGIS encoding corresponding table), open this file, you will see: 234112234213234314............ The first column 234123422343 represents the block name (symbol) in the AutoCAD; the second column 121314 represents the encoding of the MapGIS system (Note: not the subgraph number, which is visible in the digital mapping system. The method is: start the digital mapping system, a new measurement project file, system library directory is set to \MAPGIS6.1 the \SuvSlib\ installation directory, then click the menu features encoding table \ tools \ \, you will see the various features of the encoding and the parameters in the MapGIS system). For example, in AutoCAD, the name of the block representing the triangle point is SJD, and the triangle point symbol in the MapGIS system is 1110, and the last table is changed to SJD 1110............ 2.arc_map.lin (AutoCAD shape name