cad渲染技巧（CAD rendering techniques）.docVIP

cad渲染技巧（CAD rendering techniques） 1, CAD2007 comes with metal material applications (1) use CADs own metal samples to render metal parts In the panel - metal material (sample) in the 07 edition of the metal material: metal structure. Only steel, metal decoration and decorative metal. Copper bronze and brass. Decorative metal. A total of four kinds of metal material which is commonly used in daily life. In the material editor model in the advanced metal, ambient light, diffuse in check with the object, reflecting about 80 degree, other parameters as the default, is rendered out of steel, copper, bronze, brass accessories such as 4 (Figure 1) shows: The metal structure of steel frame. The diffuse color, purple, if you check the diffuse can be three-dimensional line with the accessories box color changes, above the first parts of the wire frame color to ByLayer, if the color is yellow, 23 color, 21 color, 41 color, No. No. No. 61 color, color rendering is changed as shown in (Figure 2). Change the color of the method: activation of the 3D object, right-click to bring up the properties dialog box, browse the first line in the color box and choose to use color (mentioned below with the coloring method). This feature is suitable for users to render objects according to the desired color. The rendering is done in the model of the material editor in the advanced metal mode with a reflection of about 80. If you choose the real metal way, then the light should be low (below 20), otherwise matte. (2) using CADs metal library to render metal parts CAD2007 comes with the metal material library, there are 23 kinds of metal, in addition to the above 4 commonly used, are generally professional use. Pictures are listed below will decorative aluminum, metal decorative panel, metal decoration, decorative metal Aluminum Alloy stainless steel, galvanized metal decoration and decorative metal mesh, metal decorative materials such as weathering under the rendering shown (Figure 3): 2, no