discretizing lti descriptor (regular) differential input systems with consistent initial conditions离散化lti描述符(常规)差分输入系统一致的初始条件.pdfVIP

Hindawi Publishing Corporation Advances in Decision Sciences Volume 2010, Article ID 810605, 19 pages doi:10.1155/2010/810605 Research Article Discretizing LTI Descriptor (Regular) Differential Input Systems with Consistent Initial Conditions Athanasios D. Karageorgos,1 Athanasios A. Pantelous,2 and Grigoris I. Kalogeropoulos1 1 Department of Mathematics, University of Athens, 15784 Athens, Greece 2 Department of Mathematical Sciences, University of Liverpool, Liverpool L69 3BX, UK Correspondence should be addressed to Athanasios A. Pantelous, a.pantelous@liverpool.ac.uk Received 4 April 2009; Accepted 18 January 2010 Academic Editor: Graeme Wake Copyright q 2010 Athanasios D. Karageorgos et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. A technique for discretizing efficiently the solution of a Linear descriptor regular differential input system with consistent initial conditions, and Time-Invariant coefficients LTI is introduced and fully discussed. Additionally, an upper bound for the error x kT − xk that derives from the procedure of discretization is also provided. Practically speaking, we are interested in such kind of systems, since they are inherent in many physical, economical and engineering phenomena. 1. Introduction: Preliminary Results During the discretization or sampling process, we should replace the original continuous- time systems with finite sequences of values at specified discrete-time points. This important process is commonly used whenever the differential systems involve digital inputs, and by having numerical data, the sampling operation and the quantization are necessary. Add