spatial dynamics of tuned and mistuned bladed disks with cylindrical and wedge-shaped friction dampers磁盘空间动态调整和走调刃的圆柱和楔形摩擦阻尼器.pdfVIP

International Journal of Rotating Machinery, 9(3): 219–228, 2003 c Copyright 2003 Taylor Francis 1023-621X/03 $12.00 + .00 DOI: 10.1080/10236210390147308 Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge-Shaped Friction Dampers Lars Panning, Walter Sextro, and Karl Popp Institute of Mechanics, University of Hannover, Hannover, Germany Friction damping devices such as underplatform dampers, One of the main tasks in the design of turbomachines like tip shrouds, and damping wires are widely used in turboma- turbines, compressors, and fans is to increase the reliabil- chinery applications to reduce blade vibration amplitudes and ity and efficiency of the arrangement. Failures due to blade resonance stresses to a reasonable amount. In the case of blade cracks are still a problem and have to be minimized with vibrations, relative displacements between the blades or between respect to costs and safety aspects. To reduce the maximum the friction damping device and the neighboring blades occur, stresses, the blades can be coupled via friction damping de- and friction forces are generated that provide additional damp- vices such as underplatform dampers that are pressed onto ing to the structure due to energy dissipation. Underplatform the blade platforms by centrifugal forces. In this work, a dampers are mounted between adjacent blades and pressed onto method will be presented to optimize two different types of the blade platforms by centrifugal forces during operation of the underplatform dampers in bladed disk applications with re- assembly. spect to a maximum damping effect. Various types of underplatform dam