浅谈ug与mastercam的体会心得（Talking about the experience of UG and MasterCAM）.docVIP

浅谈ug与mastercam的体会心得（Talking about the experience of UG and MasterCAM） With Mastercam and UG for years, heres a talk about my experience with Mastercam and UG. I. 2D milling The features of Mastercam programming are quick and convenient. This feature is reflected in the 2D knife road is particularly prominent. 1, Mastercam series is very fast, as long as you draw the curve is continuous. If not continuous, it is also easy to check where there is a breakpoint. An easy way to do this is to use the analysis command to set the tolerance to at least 0.00005, and then to select the seemingly continuous curve. The curve connection method can be used quickly. In short, in the Mastercam, as long as the first part of the outline of the machining parts, steps, lines, holes, slot lines, and so on all to complete, the next cam operation is very convenient. 2, because the Mastercam 2D series is convenient and fast, so no matter how many lines you have on a one-time workpiece, it is always easy to select all of them. An extra advantage is that the starting point of the series is the feed arc (which is usually set with the feed arc). This, at least UG of any version of the catch. 3, flow or multi curve processing, often there are many curves to choose, because there is no need for offset knife radius, in the Mastercam, you can use the box selection method once selected. In UG, you have to choose one by one, and you can imagine how complicated the job is! The inconvenience of UGs 2D processing: Although I love the UG, but if I say, 2D milling function and Mastercam UG is not comparable, it must be insincere words. 1, not like Mastercam, as a one-time selection of multiple contours in series, but must select a string string, click the select the next border, you can continue to select. And, if open and closed string of mixed together, then each time to set; also, knife radius offset should also pay special attention to, if not careful, perhaps the direction is reversed. Unlike Masterc